Skip to main content
Submitted by kdelaney on Tue, 07/11/2017 - 07:41

Hello,
I have a DMC-2153 and I want to power it and connect it to the network to see if it is still functional. I do not have a multiple output power supply right now so I want to test this card using variable power supplies. Can anyone help me connect the power supplies to the correct pins?

Comments 1

MattK on 07/17/2017 - 11:59

Hi kdelaney,

The DMC-21x3 is able to be powered in a couple of ways depending on the ordered option(s).

If your controller is equipped with the DC-DC option, then you can power it with a single DC supply. I'd need the full part number of the controller in order to specify what the acceptable voltage range is.

If your controller is not equipped with the DC-DC option, they you will need to supply +5V, +12V and -12V to the 6 pin power connector on the controller.

Please email me either your full part number or controller serial number so that I can help you determine the correct means of powering your controller.

mattk@galil.com